Althoff Home Services Blog: Posts Tagged ‘Residential Services’

Top 4 Reasons Your Air Conditioner Isn’t Working

Tuesday, July 3rd, 2018

Oh, fantastic. You’re sweltering on a hot day and no matter how low you set the thermostat, your air conditioning system just can’t seem to cool the house. Or maybe you feel warm-ish air coming out of the vents instead of nice cold air. What could be going on?

There are many possible reasons why your air conditioner isn’t working, but here are the four most likely ones.

1. Refrigerant leak

When most people think about their air conditioner, they think that cool air is being created. In actuality, the job of the air conditioning system is to collect heat from inside the home, move it outdoors and release it.

Have you ever driven past a construction site and seen a line of dump trucks carrying dirt away as they clear the land? One by one the trucks are loaded, filled and then driven away to be dumped at another location.

In the same way that a dump truck is used to haul dirt from one place to another, refrigerant is used in the air conditioning system as the container to move heat. Each pound of refrigerant is designed to carry a certain amount of heat outside and release it. A system that doesn’t have enough refrigerant will not be able to cool the house properly or at all.

Symptoms of low refrigerant are:

Blowing warm air
Poor performance (“I have my stat set at 70 and I can’t get the house below 75!”)
Icing on the refrigerant line

If you previously had enough refrigerant and now the level has dropped, there is a leak that must be addressed.

2. Failed capacitor

Your air conditioning unit requires more energy to start up than is available through your home’s wiring. A capacitor is added to the circuit to give the unit an electrical jumpstart. Your system contains several capacitors that help start the compressor, outdoor fan motor, and blower motor inside. The most common capacitor to fail is the compressor motor run capacitor.

Capacitor failure is very common but inexpensive and quick to repair. Since it is a very common repair, service technicians stock these on their trucks. Most capacitors fail simply due to age. The life expectancy can vary, but the typical rating is about 5-7 years.

3. Failed contactor

A contactor is a small device that controls the flow of electricity to your air conditioner’s components. Think of a contactor like a drawbridge. When the drawbridge is down, cars can drive freely over the bridge to the other side. When the bridge is up, cars have to wait until it is lowered again.

Contactors work in the same way but instead of controlling traffic, they control the flow of electricity. When your air conditioner is not in a cooling cycle, the contactors are in the “up” position blocking the flow of electricity. When the thermostat wants to start a cooling cycle, a small voltage is sent to the contactors that tells them to lower into the “down” position. Contactors will stay in the down position until the thermostat is satisfied.

Contactors typically fail due to age and normal wear and tear. Like the capacitors, failure on this component is very common but can be repaired quickly.

4. Lack of maintenance

Probably the most common reason for air conditioner failure is lack of maintenance. Like any piece of machinery, your furnace and air conditioning system requires maintenance.

Here are some common consequences of poor maintenance that can leave you without cold air or with a higher-than-normal cooling bill:

Plugged filters

As air from your home blows across the evaporator coil, heat is absorbed by refrigerant and delivered outside. If the filter is plugged and air flow is restricted, it will cause the coil to freeze and leave you without air conditioning.

Plugged condensate drain lines

In addition to cooling, your air conditioner removes humidity from the air. This water is removed through a small drain pipe and deposited in a floor drain or outside. Left unmaintained, over time this drain can form a clog. The clogged drain can cause the excess water to backup and cause damage to your furnace or property.

Plugged condenser coils

Heat removed from the house is taken outside and released. If the outdoor coils are not maintained and kept clean, your system will be very inefficient. The unit’s inability to release heat will cause the system to run much longer and do a poor job of cooling the home.

Let the pros at Althoff take care of your AC system before there’s a problem.

If it’s been awhile since you’ve had your AC system checked out or maintained, do yourself a favor: Get it done before you’re left without cold air on a hot day. Our licensed Chicago HVAC technicians can take care of your AC tuneup or get you set up on a regular maintenance plan for peace of mind. If you’re experiencing a problem now, give us a call and we’re on it! Contact us at 800-225-2443 to schedule.

Tags: Residential Cooling, Residential HVAC, Residential Services
Posted in Air Conditioning, Water Line | Comments Off on Top 4 Reasons Your Air Conditioner Isn’t Working

The Difference Between Commercial and Residential HVAC Services for your Chicago Property

Wednesday, June 13th, 2018

Do you know the differences between residential HVAC and commercial HVAC? Knowing the differences can help you choose the right contractor for your routine maintenance, repairs and HVAC replacements.

Residential HVAC

Residential HVAC contractors repair, replace and maintain central air conditioning and heating units on single-family homes. These units often contain an outdoor condenser that is located near an outside wall and is responsible for dissipating heat and an indoor unit that is responsible for filtering the air and pushing the cool air through the air ducts.

Commercial HVAC

Commercial HVAC units are much larger than residential HVAC units because they are needed to cool much larger spaces, and they must be repaired, maintained and installed by commercial HVAC contractors that are familiar with large systems. These units are typically located on rooftops, and depending on the size of the building, more than one rooftop unit may be installed. Unlike the residential HVAC system, the commercial rooftop unit is an all-in-one unit that contains everything needed to heat and cool the building. The only items located inside the commercial or large multi-story building are the air ducts and the thermostats.

The Primary Differences Between Commercial and Residential HVAC Units

There are three main differences between commercial and residential HVAC units, including the size of the units, the location and the expansion options.

1. Size and Power of the Unit

Commercial HVAC units are often much larger and much more powerful than their residential counterparts. This is because they must be able to heat, cool and dehumidify the occupied spaces of the building, which could range in size from 5,000 square feet to more than 100,000 square feet. By contrast, single-family residential homes average about 2,000 square feet, and their heating and cooling functions are often separate with the cooling functions being controlled by the central air conditioner and the heating functions controlled by a furnace or heat pump.

2. Location of the HVAC Unit

Because commercial HVAC units are so large, they are often located on rooftops to keep the bulky and oftentimes unsightly equipment out of view of the public. Rooftops also offer lots of room, which means multiple rooftop units can be easily connected together to add heating and cooling power. Residential HVAC units are rarely located on roofs. Instead, the inside parts of the unit are typically located inside an HVAC closet, and the outdoor unit is typically located near an exterior wall and connected to the interior unit via copper piping and electrical wiring.

3. Expansion Options

Residential HVAC units are not typically expandable. Instead, the residential HVAC technician chooses the right sized unit by calculated the occupied square feet, number of doors and windows and ceiling heights. Once the area to be cooled is known, the right sized unit can be purchased and installed. If expansions are performed on the house and additional cooling power is needed, the unit has to be replaced with a large HVAC system.

By contrast, commercial HVAC units are designed to be expandable. If the commercial building undergoes a renovation that increases the occupied square footage, additional rooftop units can be connected to the existing units in order to provide more heating and cooling power.

Residential and Commercial HVAC Services with Althoff

We are proud to be able to provide the entire city of Chicago and the surrounding communities with residential HVAC services and commercial HVAC services. Our residential and commercial heating and cooling technicians are experienced in repairing, replacing and maintaining all types of HVAC equipment from complex rooftop units located on multi-unit multi-story buildings to central units located outside single-family homes.

To talk to one of our HVAC technicians about replacing, repairing or maintaining your residential HVAC system, call us at 815-455-7000. To have your commercial HVAC system serviced, replaced or upgraded, call us at 800-225-2443.

Tags: Commercial Building, Cooling, Facility Manager, Heating, HVAC, HVAC Installation, HVAC Repair, Property Manager, Residential Cooling, Residential HVAC, Residential Services
Posted in Heating | Comments Off on The Difference Between Commercial and Residential HVAC Services for your Chicago Property

Why Does My Heater Make a Screeching Sound?

Monday, May 14th, 2018

“Do you know how old your sump pump is?”

I love to ask people this when I get the chance. Unless they recently had a flooded basement, they don’t remember. Nobody does.

That’s not surprising. There’s a lot to remember these days … passwords, websites, birthdays, anniversaries (especially that last one!). After awhile, it’s hard enough to remember your own age, let alone the age of your sump pump. Plus, it’s down in the basement where you never go if you can help it. Even if you do look at the sump pump, it’s not like there’s a tag on it that clearly tells you the age.

Here’s the thing. Even though forgetting your sump pump’s birthday is understandable, it can lead to problems (and not because you didn’t get it a gift…).

Your sump pump is probably older than you think.

I was recently discussing average sump pump life expectancy with a major manufacturer. They said: “The average life expectancy for a sump pump is five to seven years.”

Wow, I thought. That comes really fast.

I talk to customers all the time who say, “Yeah, I think we had the sump pump replaced a few years ago.” So, I go into the service history, and it was actually 10 years ago! Time flies, right? Some people have been in their homes for over 10 years, and have never replaced the sump pump that came with the house.

That’s a problem, because flood water entering your basement is NOT the time you want to discover that your sump pump is on its last leg.

What are some signs you should replace your sump pump?

Old Age: Though the average life expectancy is five to seven years, you may get more or less use depending on how hard and how often the sump pump has to work. Have a professional examine the pump to determine what shape it’s in.
Loud and/or Unusual Noises: Goes for all machines, right? Some noise is normal, but if it’s louder than you remember, call in a pro to take a listen. Rattles, thunks, knocking and grinding sounds may mean a motor problem.
Cycling On and Off: If your sump pump goes through constant cycles of turning on and off—or doesn’t turn on or off when it should—call in a professional. You may need a new pump, or there may be a problem with the power or float switch.
Won’t Stop Running: If your sump pump runs continuously, it may be unable to handle the water load the way it should. It may be time to replace it.

Let the pros at Althoff’s replace your aging sump pump before there’s a problem.

Do yourself a favor: Get your old sump pump replaced. Don’t go through another rainy season hoping you won’t have a problem. Our professional Chicago plumbers can get that squared away for you. Contact us at 800-225-2443 to schedule.

Also, remember that you should have a professional sump pump inspection once a year. That little pump with a big job is too important to ignore.

Plus, when someone asks you if you know how old your sump pump is, you can say “YES!”

Receive a Free WiFi Enabled Control When You Purchase a Battery Backup System for Your New Sump Pump ($350 value )! Call 800-225-2443 now.

Tags: Residential Plumbing, Residential Services
Posted in Plumbing | Comments Off on Why Does My Heater Make a Screeching Sound?

How to Keep Your Household Safe from Furnace Carbon Monoxide Poisoning

Monday, February 12th, 2018

Most of us view our homes as inanimate objects, constructed of wood, bricks, steel, glass, and roofing materials. Few look at our houses as a representation of who we are. Literally.

Take, for example, our home’s electrical system. It serves as the “nervous system” of our houses, providing the power it needs to function efficiently. A home’s plumbing serves much like our own and even our insulation qualities are similar. Have you ever given thought to the fact that your home’s HVAC system serves as the lungs of your home?

For the most part, in extremes of heat and cold, we rely on our heating and air conditioning to provide us with clean, refreshing air. There are those few months in Crystal Lake and NW Chicago that we can shut it all off and open our windows but for the most part, we rely on our HVAC “lungs” to provide us with comfortable, safe, clean air to breathe.

There is a potential problem that can occur, however, particularly in colder weather. It is the issue of a carbon monoxide leak. A furnace carbon monoxide leak is a serious issue that takes diligence to prevent and expert technicians to diagnose and resolve.

What is Carbon Monoxide?

Carbon monoxide is a colorless, odorless flammable gas that is created when the combustion of carbon is not completed. The biggest issue with carbon monoxide is that it is toxic, causing illness, brain damage and even death can occur.

How is Carbon Monoxide Produced?

Carbon monoxide is produced by anything that burns carbon as a fuel. This includes water heaters, fireplaces, charcoal grills, kerosene, gas heaters, wood stoves, and even clothes dryers. The more energy an appliance uses, the greater the risk of the carbon monoxide it can produce.

Why is it a Dangerous?

Carbon monoxide is dangerous because takes the place of oxygen in the bloodstream and prevents oxygen from getting to the heart, brain, and organs. When exposed to carbon monoxide in large amounts, humans can be overcome in just a matter of minutes. This can cause a person to lose consciousness and ultimately suffocate in a relatively short period of time.

How Can You Protect Yourself and Your Family?

The best way to prevent yourself and family from carbon monoxide poisoning may be through the installation of carbon monoxide detectors. This will serve as a last line of defense in the event carbon monoxide levels in your home are becoming dangerous. There are steps you can take, however, to minimize your home’s carbon monoxide levels so they never reach the point of becoming dangerous.

Schedule an annual tune-up or maintenance check on your furnace. Most carbon monoxide issues develop over time and can be discovered and addressed by an annual maintenance check on your furnace. Many carbon monoxide issues develop gradually and can be prevented by these maintenance checks.
Change air filters often. As inexpensive and easy to change as air filters are, many homeowners simply forget or fail to change their air filters often enough. This can prevent fresh air from entering your furnace. It also increases the risk of carbon monoxide production.
Make sure your furnace was installed correctly. It doesn’t matter whether your furnace was installed 10, 20 or 30 years ago, there may have been errors made in its installation. Poor ductwork, venting or blower installation can create carbon monoxide problems. They also may be inhibiting your furnace from operating efficiently. Standards are higher today. To make sure carbon monoxide is not an issue with your system, contact a professional.

Few things may be as frightening as the thought of a furnace carbon monoxide leak. We rely on our furnaces as a source of warmth and comfort. If it has been more than a year since you’ve had a furnace check-up, cleaning or tune-up, we would encourage you to schedule one today. Of course, we would call us at Althoff Industries. For over 50 years we’ve been keeping families safe and comfortable in NW Chicago. We would be honored to assist you.

Tags: Heating, HVAC, Residential Heating, Residential HVAC, Residential Services
Posted in Heating, Home Improvement | Comments Off on How to Keep Your Household Safe from Furnace Carbon Monoxide Poisoning

3 Most Common Winter Furnace Repairs

Tuesday, February 6th, 2018

During winter’s blast, our furnaces work overtime to keep us comfortable without much regard to age or condition. Eventually, the weakest link in a heating system will fail, creating a need for a furnace repair. While your furnace may carry a decade or longer guarantee, some of the smaller, more susceptible parts, like those listed below, may fail prematurely.

Here are the most common furnace repairs our technicians encounter each winter.

1. Igniter Failure

Igniter failure is the single most common cause of gas furnace problems we see.

Furnace igniters replaced the pilot light systems that started gas furnaces in the past. If you remember “the pilot light going out” on your old gas furnace, you know that pilot lights were inefficient and often extinguished by drafts.

Rather than an actual standing flame, modern ignitors use electricity to heat small wires or filaments until they produce a spark to ignite the gas furnace. While igniters are safer and much more energy efficient than the old pilot lights, they’re still a common source of furnace issues.

Ignitors can malfunction with age, wear and tear. A dirty or clogged ignitor can prevent your gas furnace from igniting properly.

2. Issues With the Flame Sensor

The flame sensor is another part of the furnace ignition system that is prone to failure.

Older gas furnaces had a thermocouple, which could detect the heat put off by the pilot light. If the thermocouple determined there was no pilot light, it would prevent the flow of gas to the furnace for obvious safety reasons.

Modern furnaces use a flame sensor which, in essence, serves the same purpose. A flame sensor will prevent the flow of gas into your furnace if it detects there is no ignition source like a flame ignitor. The flame sensor must perform this task dozens if not hundreds of times per day throughout the cold weather months. Over time, the flame sensor can fail due to this great demand.

3. Problems With the High-Limit Switch

Have you noticed that your furnace will kick on minutes before warmer air begins to circulate throughout your home? This is the high-limit switch at work.

The high-limit switch has the important job of keeping the blower from powering air through your home until it’s heated sufficiently. Without a functioning high-limit switch, you’d be shivering in cold, unheated air!

This is another part of your furnace that is asked to perform thousands of times through the winter and will likely eventually fail.

When To Call An HVAC Professional

While it’s possible for experienced do-it-yourselfers to complete some of these common repairs on their own, we would caution against taking on such a task if you feel at all uncomfortable. Most modern furnaces combine electricity and gas to create combustion—two elements that require caution, know-how, and appropriate safety measures. When it comes to any furnace repair, the safety of you and your family is the primary concern.

If you’re in the Greater Chicago area, schedule your furnace service online or give us a call at (815) 455-7000. Our licensed Chicago HVAC technicians can diagnose your furnace problem and get it resolved fast so you’re not left in the cold.

This information is provided as a general guideline. Althoff Industries does not assume any liability resulting from the provided information.

Tags: Residential Heating, Residential HVAC, Residential Services
Posted in Heating, Plumbing | Comments Off on 3 Most Common Winter Furnace Repairs

HVAC Installation Day: 6 Steps our Team Takes to Ensure Success

Wednesday, January 31st, 2018

HVAC installation day for your new HVAC system is an exciting time for our team at Althoff Industries. While we try to minimize any negative impact HVAC installation day may have on you and your family, we want you to know what to expect. We also hope that the day brings a certain excitement to you, knowing you will soon have a new, more efficient HVAC system providing a more comfortable indoor environment.

There are six general steps our team takes to help ensure the successful installation of your new equipment.

Loading and preparation at our shop. Installation day starts with making sure we not only have your new HVAC equipment aboard our trucks but all the tools, testing equipment, and components to complete your installation properly, safely, and efficiently. This takes making sure we have everything we need loaded before we head to your NW Chicago suburb area home.
Arrival and meeting of the installation team. Once our technicians arrive, they will introduce themselves and explain a bit about the installation process and what you can expect. They will determine the best place to park vehicles as to offer as little inconvenience to you as possible.
Preparation for installation. Preparation for installation includes determining the easiest and simplest pathway to the installation site(s) and making sure any flooring is covered to prevent any potential damage. Once access is determined, the real work is ready to begin.
Removal and disposal of old equipment. Before we can install your new equipment, we must remove the older equipment it will be replacing. This can sometimes be a relatively simple process but in some instances where very old equipment is involved, it can be a challenge. We will remove all of the old equipment and get it ready for disposal upon our departure.
Installation of new equipment. Once the old equipment is removed, we will bring your new HVAC equipment into place and begin the installation process. Even after installation, our job is not done as the HVAC system must be carefully tested and checked for safe, smooth, and efficient operation. This is done through an initial start-up and thorough monitoring and testing using specific HVAC testing equipment to monitor gasses, combustion, and airflow.
We’ll explain your equipment and its operation. Once our technicians are completely satisfied your new HVAC equipment has been properly and safely installed, they will explain the operation of your equipment to you and the routine maintenance you can perform to keep it running at peak efficiency.

You should begin enjoying the benefits of your new HVAC equipment quickly through better heating and cooling of your home and lower energy bills! Our goal is to leave your home as we found it, only better!

We’ve prepared a brief video of our team preparing for an install. Enjoy the show!

You can help us on HVAC installation day by removing any items that may be in the path while we take out or bring in your equipment. For the safety of any pets as well as our technicians, please keep any animals in a separate area during the installation process. If you have a cat or dog that is sensitive to noise or strangers, you may want to consider having a friend or relative take your pet during the installation period.

Keep in mind, the installation of a new HVAC system is a major project. It is likely the largest mechanical system in your home. There will be noise and technicians will be coming in and going out of your house frequently. While we do everything we can to minimize disruptions, it is an involved process.

Thanks for choosing Althoff Industries. If you ever have any questions about your new HVAC system or would like to know more about keeping your indoor air as clean and comfortable as possible, please contact us.

Tags: Cooling, Heating, HVAC, Residential Cooling, Residential Heating, Residential HVAC, Residential Services
Posted in Heating | Comments Off on HVAC Installation Day: 6 Steps our Team Takes to Ensure Success

Whole House Humidifier Pros vs. Cons

Wednesday, January 24th, 2018

Many view home heating from a pretty straight-forward standpoint. If they are comfortable, their thermostat is set correctly. If they are not comfortable, the thermostat is set too low or too high. Of course, when multiple family members are involved, this can create quite a challenging situation that is often resolved by the person who pays the utility bills. There is, however, another major factor in the comfort of your home. It is humidity.

We are all familiar with humidity during our Chicago summers but humidity plays a significant role in comfort during our winters in the Crystal Lake area as well.

Humidified air can feel much warmer, cozy, and comfortable. Dry air can lead to static electricity, premature drying of wood cabinets, flooring and furniture, and even more frequent illness. Families are often surprised at the amazing impact a properly humidified home can have on their comfort, especially during the cold weather months. They can also see energy saving benefits.

Some are familiar with smaller, single-room humidifiers that can help humidify a small space. These portable humidifiers can offer some relief but if lack of humidity is an issue for the whole house, and having an impact on you and your home’s comfort you may want to consider a whole house humidifier.

What is a Whole House Humidifier?

A whole house humidifier is a device that works with your furnace to add moisture into the air in your home. This moisture is provided through your home’s plumbing and is heated and dispersed into your home through your furnace and ductwork. A whole house humidifier is sometimes referred to as a furnace humidifier and provides air that simply feels warmer.

Pros and Cons

If you experience dryer air in your home, you can find relief from either a portable or whole house humidifier. Portable humidifiers only impact a small area and the water tank the humidifier uses must be refilled frequently. A whole house humidifier will improve the comfort of your entire home and because it is directly fed moisture through your plumbing, refilling a tank is unnecessary.

The downsides to a whole house humidifier are few but significant. First, a whole house or furnace humidifier can be a sizeable investment. Many, however, find that the air is warmer in their home following installation, allowing them to operate their furnace at a lower temperature. This, of course, can translate into long-term energy savings, which can help offset the original investment.

The other con to the installation of a whole house humidifier is that it can be a fairly complex task. It should be handled by a professional. A furnace humidifier must be installed correctly to provide full value. Beyond exceptional comfort, families using a whole house humidifier experience less illness and annoying static shocks.

Contact the Pros at Althoff Industries

If you’ve ever caught yourself saying “I can’t seem to get warm in here” or are constantly edging the thermostat upwards to stay warm, the problem may not be the heat but the lack of humidity. We invite you to contact us at Althoff Industries for a complete assessment of your HVAC system and your indoor air quality. We can help determine the efficiency of your present system and help you decide if a whole house humidifier can be beneficial to you and your family.

Staying comfortable indoors is more than just about the heat. Discover the important role well functioning equipment and humidity play in the warmth of your home with a call to Althoff Industries.

Tags: Air Quality, HVAC, Residential Air Quality, Residential HVAC, Residential Services
Posted in Indoor Air Quality | Comments Off on Whole House Humidifier Pros vs. Cons

What To Do Before Calling for Emergency Furnace Repair

Wednesday, January 10th, 2018

It’s a frigid winter day and you wake up to a cold house. You soon discover that the heater isn’t working! Your first thought is to call for emergency furnace repair.

Before you grab your phone, you can take a few simple steps to see if you may be able to resolve the issue on your own. This may help correct the problem quicker and without the expense of a potentially unnecessary emergency furnace repair call.

5 Quick Furnace Troubleshooting Tips

1. Check your thermostat.

Make sure that the thermostat is on and set to “heat.” This sounds obvious, but you wouldn’t believe how many service calls happen because the homeowner didn’t know that someone (like a guest or child) adjusted the settings!
If your thermostat has a fan setting, set it to “auto” instead of “on.” Otherwise, the fan may blow continually even when the air isn’t being heated.
If the room temperature is lower than the thermostat setting, try adjusting the setting up a few degrees to see if the furnace kicks in.

2. Make sure you have power to the furnace.

Even if you have a gas furnace, an interruption in electric power will interrupt your furnace from producing heat. You may have a circuit breaker that has tripped.

If that’s the case, you can reset it by turning the circuit all the way off and then on again. If the circuit immediately breaks again, call a professional.

3. Check your air filter.

An air filter that is extremely clogged will not allow the air to be heated properly. It may cause your furnace to overheat and shut down.

Remove the filter and hold it against the light. Can’t see any light through it? Replace it. We recommend checking your furnace filter every month and replacing as needed.

4. If you have a gas furnace, make sure the gas supply is on.

If you’ve had any repairs done lately, someone may have shut off the gas supply valve and then forgot to turn it back on. Or, the gas company may have shut down the gas lines for maintenance. A quick check with the gas company is a good idea if you think this may be the case.

Check the gas valve at the gas company’s meter.
Check the gas valve on your furnace. Your furnace’s gas valve is on when the handle is inline (parallel) with the pipe. If it’s off, the handle will be perpendicular to the pipe.

If you smell gas, turn off the supply and immediately call a professional.

5. Check the ignition source or pilot light.

Most modern furnaces have an igniter coupled with a flame sensor rather than a physical pilot light. Both of these can wear out and require repair. In fact, ignitor and flame sensor problems are some of the most common furnace repairs we encounter.

If you have an older furnace, your unit may have a physical pilot light. A draft or interruption in gas service can cause the pilot light to go out. If your pilot light is out, and you’ve already confirmed that you have a safe gas supply, try relighting it according to your owner’s manual. (This is usually done with a fireplace match or long barbeque-style lighter.)

If you’re not comfortable with this, or the pilot light won’t stay lit, call a technician.

4 Furnace Facts to Know When Calling for Repair

If the above steps do not resolve your issue, it’s time to call for furnace repair. Gathering the following information will help your technician resolve the issue more promptly.

Make note of your furnace brand and model number.
Make note of your furnace’s approximate age.
Write down the steps you took in trying to determine the problem.
Be sure to let the repair company know if they have done previous work for you.

Share the above information when you’re on the phone with the customer service representative when scheduling your service call.

At Althoff Industries, we appreciate having this information so our technician has a head start on the specific problem. He or she can make sure to have the appropriate part or parts to resolve the problem on the initial call.

Althoff Industries offers Chicago-area emergency furnace repair 24 / 7 / 365.

Waking up to a home without heat can interrupt your entire day. It is our goal at Althoff Industries to minimize any disturbance to you and your home and restore heat quickly and safely. If the loss of heat is the result of a deeper issue relating to the age or maintenance of your furnace, we will discuss your options with you.

If you live in the NW Chicago suburbs or Crystal Lake and McHenry County area, we invite you to make Althoff Industries your go-to team when it comes to the comfort of your indoor air. Any day, anytime, we are here to assist you. Call (815) 455-7000.

This information is provided as a general guideline. Althoff Industries does not assume any liability resulting from the provided information.

Tags: Residential Heating, Residential HVAC, Residential Services
Posted in Heating | Comments Off on What To Do Before Calling for Emergency Furnace Repair

Althoff HVAC Trucks: Fully Stocked to Finish Residential Service Jobs

Wednesday, January 3rd, 2018

Those who live and work in the Crystal Lake, Northwest Chicago area, and its suburbs have likely seen our Althoff Industries service trucks on the area roadways. You may not, however, have given much thought to what all is contained in these vehicles.

It helps to understand that for our technicians, these trucks tend to serve as their offices on wheels. As such, they need to contain the parts and tools that we use most often. This better allows us to complete a repair on the first call properly. It also saves us, and you, time and money.

Of course, with so many brands, types, sizes, and configurations of heating and air conditioning equipment, this leads to quite a collection of parts and tools. Is it always pretty and well-organized in the back of our service trucks? Not very often. But through the years, however, we have become quite adept at making sure our trucks are equipped to handle the most common HVAC and plumbing related problems on an initial call. Let’s take a closer look at what you may typically find in an Althoff HVAC residential repair truck.

Hand and Power Tools

Of course, one of the most critical factors in residential HVAC repair is having the right tool for the right job. This means a variety of both common and specialized hand and power tools that range from hammers and pliers to sheet metal cutting tools and soldering equipment.

Gauges, Diagnostic and Measuring Equipment

At Althoff Industries, our primary concern is that of the safety of your family. This makes it necessary that we have a variety of gauges and measuring equipment to help us properly diagnose any potentially dangerous conditions. These devices include equipment like a combustion analyzer, draft gauge, manometer, and more. Humidity and temperature gauges also help us in determining HVAC related issues.

Various Nuts, Bolts, and Small Parts

The back of one of our residential HVAC repair trucks will have a variety of nuts, bolts, screws, and small parts to help technicians complete their tasks. This will also include a variety of sealers, electrical tapes, duct tape, and PVC and sheet metal parts.

Parts that Commonly Fail

Some HVAC parts are more prone to failure than others. These include relays, transformers, circuit boards, capacitors, thermostats, thermocouples, blower motors, igniters, and more. Our trucks contain a variety of these parts including replacement hoses and valves, wiring, switches, connectors, breakers, and others.

The Most Important Part

Our trucks contain refrigerant, refrigerant reclaim jugs, flush kits, glycol and glycol pumps, and so much more. But it is what you don’t see in the back of our HVAC contractor truck that is perhaps most important. That is the knowledge, training, and experience of our Althoff Industries technicians.

When you contact us for a service call, you likely want that call completed as efficiently and quickly as possible. A properly equipped and stocked truck can help us better accomplish that.

Keeping our trucks properly stocked and outfitted with the latest tools is part of the cost of doing business. So is properly maintaining our vehicles so they are ready to go when you need us. Whether your furnace decides to give out during the coldest day of the winter or your AC fails in the mid-summer heat, you can count on the team at Althoff Industries to be prepared. When you experience HVAC issues, we invite you to contact us, at Althoff Industries.

Tags: Cooling, Heating, HVAC, Residential Cooling, Residential Heating, Residential HVAC, Residential Services
Posted in Heating, Plumbing | Comments Off on Althoff HVAC Trucks: Fully Stocked to Finish Residential Service Jobs

10 Tips to Save on Illinois Energy Costs this Winter

Wednesday, December 27th, 2017

Odds are you and your neighbors are looking for ways to save on heating costs this winter. You’ll be glad to know you can cut Illinois energy costs without expensive remodeling or the purchase of brand new HVAC equipment. Here are some relatively simple, low-cost ways you can cut your heating costs on your Illinois energy bill this winter.

10 Tips to Save on Heating Costs

Check the height of your exterior door thresholds. You should not be able to see any light between the bottom of your exterior doors and the bottom threshold under the door. If you can, you are giving warm air an easy way to get out and drafty cold air an easy entry point. Cure this issue by raising the threshold height or by adding a door sweep to the bottom of the door. You can also use a variety of tubular, stuffed draft stoppers that you can lay across the bottom of your door once you are inside.
Use a portable heater to help heat the room in which your family spends the most time. Most of us heat our entire home to the temperature we are most comfortable, yet many of the rooms are empty. Consider a space heater or portable heaters for the rooms you use most. This will keep you cozy without wasting money overheating rooms that aren’t being used.
Check your ductwork for leaks. The sheet metal pieces of your ductwork can develop leaks and creases over-time. This prevents all of the heated air from getting to the specified heating vents. You can save on heating costs by inspecting ductwork where you can and sealing any seam that appears loose with duct tape.
Buy a programmable thermostat. You will likely save heating costs by purchasing a thermostat that you can program to comfortable temperatures when you are at home and save energy when you are not. Thermostats are inexpensive, usually under $50.
Buy heavier, insulated curtains to help keep your home warm. Heavier blinds, curtains, and shades can do wonders keeping out the cold, especially if you have older windows. At the same time, you can use windows that face the sun to “capture” natural sunlight to help warm your home during daylight.
Check weatherstripping around windows and doors. It may seem like last year when you replaced weatherstripping around your doors and windows but it may be much longer. Weatherstripping loses its ability to be effective after several years and replacing it can help you save on heating bills.
Caulk or use expanding liquid foam to insulate where pipes and vents enter your home. Anywhere there is a breach into your home where cold air or drafts can enter is likely costing you money. Look under your sinks, around your dryer’s vent, and take electrical socket covers off to see where you can save on heating bills.
Install clear plastic film over windows. Today’s modern, plastic fill products are easy to install and are hardly noticeable once installed. Using a simple blower hair dryer will stretch the film to be virtually invisible. The impact they can have to cut heating costs can be surprising.
Reverse ceiling fans. You may know that heat rises but did you know that your ceiling fan can help recirculate that warm air back down from the ceiling to save on heating bills? There is likely a switch on your fan that can reverse the direction of the blades to counterclockwise in the winter, helping you use energy more efficiently.
Change your furnace air filters. We say this so often but it is absolutely critical if you want to save on heating costs. Furnace filters are inexpensive and easy to change and should be step number one if you want to cut heating costs.

Of course, if you are still frustrated with your heating bills, we invite you to call the indoor air experts at Althoff Industries. We’ve been helping keep Chicago and Illinois area homeowners comfortable for over 50 years.

Tags: Heating, HVAC, Residential Heating, Residential HVAC, Residential Services
Posted in Heating | Comments Off on 10 Tips to Save on Illinois Energy Costs this Winter